American Changer AC1178, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 23

12
Reject Sns.
Reject sensor blockage or failure
Return
Mech
Unit failure. Needs to be replaced.
Thermistor Thermistor failure
No Comm The Flex-2 main logic board is unable to communicate with
the coin acceptor.
Programmer Flex Programmer Board Error Conditions
No Comm The Flex-2 main logic board is unable to communicate with
the Flex Programmer Board.
Disabled The use of a secondary display is not enabled.
Enabled The use of a secondary display is enabled.
3.4 – Programming Menu
To enter the programming menu, begin by pressing the “Select Switch” on the Flex-2 main logic board.
Pressing the select switch will bring the display to show “Enter Access Code.”
Use the Flex Programmer Board to enter the access code. The default code from the factory is “1234”
To exit the programming menu or the “Enter Access Code” screens press the “Select Switch”
Use the Flex Programmer Board to navigate the menus. Press the “Cancel” button and enter a menu
number to be brought immediately to that menu or press the
Back/Next button to step through the
menus.
All the menus work the same:
No/Yes : Selects status
Back/Next : Selects the item
Exit : Exits the setup menu
NOTE: ALL MENUS MAY NOT APPLY TO YOUR SPECIFIC MODEL MACHINE. UNUSED MENUS WILL BE
IDENTIFIED BY AN ASTERISK *.