American Audio VMS4 MIDI, Инструкция по эксплуатации

Страница: 30 / 56

©American Audio® ‐ www.americanaudio.us VMS4™ Instruction Manual Page 30
(13) CUE
Pressing the CUE button during playback immediately pauses playback and returns the track to the last set cue point. The red CUE LED will glow
when the unit is in cue mode. The LED will also flash every time a new CUE POINT is set.
The CUE button can be held down to momentarily play the track. When you release the CUE button it instantly returns to the CUE POINT. You can
also tap the CUE button to create a BOP EFFECT.
(14) JOG WHEEL
Attention: Make sure that NOTHING is touching or resting on the jog wheels when you power on the VMS4™.
This wheel has three functions:
•
The wheel works as a pitch bend during Playback. Turning the wheel clockwise can increase the pitch percentage up to 100%, and turning
the wheel in the counter ‐ clockwise direction can decrease the pitch percentage down to ‐ 100%. The pitch bend will be determined on how
long you turn the jog wheel continuously.
•
The jog wheel also controls the scratch effect, when the scratch effect is active.
•
The jog wheel can also serve as frame search.
Note: The inside of the wheel is touch sensitive and the outside edge of the wheel is not. Example: You can scratch by touching the inside or center
of the wheel, and pitch bend when you touch the outside edge of the wheel.
(15) VINYL
Pushing this button activates VINYL mode.
(16) SHIFT
Enables secondary MIDI commands on buttons, jog wheels, and MIDI functions on mouse pad.