background image

Important Precautions

•  To reduce the risk of electrical shock or fire, do not expose this  
   unit rain or moisture.
•  Do not spill water or other liquids into or on to your unit.
•  Do not attempt to operate this unit if the power cord has been  
   frayed or broken.
•  Do not attempt to remove or break off the ground prong from  
   the electrical cord. This prong is used to reduce the risk of elec- 
   trical shock and fire in case of an internal short.
•  Disconnect main power before making any type of connection
•   Do not remove the cover under any conditions. There are no 
   user serviceable parts inside.
•  Never plug this unit in to a dimmer pack.
•  Always be sure to mount this unit in an area that will allow  
    proper ventilation. Allow about 6” (15cm) between this device 
   and a wall.
•  Do not attempt to operate this unit, if it becomes damaged.
•  This unit is intended for indoor use only, use of this product out-
   doors voids all warranties.
•  During long periods of non-use, disconnect the unit’s main 
   power.
•  Always mount this unit in a safe and stable manner.
•  Power cords should be routed so they are not likely to be   
   walked on, pinched by items placed upon or against them.
•   Cleaning -The outside of the unit should be wipe down with a 
   soft cloth and mild cleaner when needed.
•  Heat -The appliance should be situated away from heat sources  
   such as radiators, heat registers, stoves, or other appliances  
    (including amplifiers) that produce heat.
•  The fixture should  be serviced by qualified service personnel 
   when:
    A. The power-supply cord or the plug has been damaged.
    B. Objects have fallen on, or liquid has been spilled into the unit.
    C. The appliance has been exposed to rain or water.
    D. The fixture does not appear to operate normally or exhibits a  
         marked change in performance.

Introduction

Introduction:   

Congratulations  and  thank  you  for  purchasing 

the  American  Audio

®

  V-01 

Series™

  amplifier.  This  amplifier  is  a 

representation  of  American  Audio’s  continuing  commitment  to 
produce the best and highest quality products all at an affordable 
price. Please read and understand this manual completely before 
attempting  to  operate  your  new  amplifier.  This  booklet  contains 
important information concerning the proper and safe operation of 
your new amplifier.

Unpacking:

  Every  V-01 

Series™

  amplifier  has  been  thoroughly 

tested  and  has  been  shipped  in  perfect  operating  condition. 
Carefully  check  the  shipping  carton  for  damage  that  may  have 
occurred  during  shipping.  If  the  carton  appears  to  be  damaged, 
carefully inspect your unit for any damage and be sure all acces-
sories necessary to operate the unit has arrived intact. In the event 
damage has been found or parts are missing, please contact our 
toll free customer support number for further instructions. Please 
do not return the amplifier to your dealer without contacting cus-
tomer support first. 

Installation: 

This  amplifier  is  designed  to  mount  into  a  standard 

19”  rack.  The  front  panel  provides  four  holes  used  to  screw  the 
unit  into  a  rack.  The  unit  also  provides  a  way  to  rear  mount  the 
unit into a rack for added security. Rear mounting the unit is espe-
cially recommended for this amplifier if the unit is to mounted into 
a mobile rack.  

Customer Support:

 American Audio

®

 provides a toll free custom-

er support line, to provide set up help and  to answer any question 
should you encounter problems during your set up or initial opera-
tion. You may also visit us on the web at www.americanaudio.com 
for any comments or suggestions. For service related issue please 
contact  American  Audio

®

.  Service  Hours  are  Monday  through 

Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.
    Voice: (800) 322-6337      E-mail: [email protected]
    Fax: (323) 582-2610

©American Audio®  -  www.americanaudio.com  -  V-01 Series™ Power Amplifier User Manual  Page 4

Содержание V-01 Plus Series























Отзывы: