©American Audio® www.americanaudio.eu UCD-200™ User Manual Page 30
P
ITCH
A
DJUSTMENTS
This function will increase or decrease a track‘s playback speed or "pitch", this is not a
momentary change as in "Pitch Bending". The maximum pitch percentage of the Pitch Slider
is +/-100%. The Pitch Slider (
5
) is used to decrease or increase the playback pitch. If the slider
is moved up (towards the top of the unit), the pitch will decrease, if the slider is moved
down (towards the bottom of the unit) the pitch will increase.
U
SING THE
P
ITCH
S
LIDER
P
ERCENTAGE
S
ELECTOR
(8)
You may choose a pitch operating
range at any time. To change the
operating range be sure the pitch
function is turned on, see
Figure 10
.
The pitch percentage can be
changed b/-4%, +/-8%, +/-
16%, and 100%. 4% will allow the
least amount of pitch manipulation
and 100% will allow the most
amount of pitch manipulation.
Figure 10
The LED of the % button (
8
) is glowing red for 4%,
glowing yellow for 8%, or glowing amber for 16%, and
all LEDs glowing for 100%.
To adjust the different values, press the Pitch ON/Off Button (
8
) and tap on the % button (
8
)
until your desired value is reached.
A
CTIVATING THE
P
ITCH
S
LIDER
(5)
To activate the Pitch Slider (
5
), you
must turn the pitch function on.
Press the Pitch button (
8
) to turn on
the pitch function, when the pitch
function is activated LED will begin
to glow.
If the pitch function is not activated
the Pitch Slider (
5
) will not function.
Figure 11
