©American Audio® www.americanaudio.eu UCD-200™ User Manual Page 26
Version – CON:XX (Control version)
Displays the firmware version.
DSP:XX (DSP version)
SER:XX (Servo version)
Load Default – Press Track Knob to enter Load Defaults. (LCD displays “Load OK”.)
Will reset all settings to factory default except for firmware version.
Exit & Save – Exit & Save Setting to Next Power On (LCD displays “Saving”.)
This will save all changes; if changes are not saved the unit will revert to last saved changes
on power off.
Press the
Track Knob
to fast exit & save in any operating mode.
NOTE:
SLEEP TIME:
The CD player automatically shuts off the transport and laser after about 15
minutes when in pause or cue mode. This extends the life of your motor drive and laser.
During sleep mode the display shows the word
Sleep
. To wake up the player, just press
the Cue or Play button, the display turns to normal and is ready to receive instructions.
You can enter the Sleep Time menu to adjust sleep time, range is 5 ~ 120 minutes.
SAVE:
PITCH ON/OFF, PITCH RANGE, SGL/CTN, AUTOCUE, TIME MODE, KEY LOCK,
DISPLAY/SCROLL, TIME/JOG MODE.
DEFAULTS:
PITCH (ON), PITCH RANGE (8%), PLAY MODE (CTN), AUTO CUE (ON), TIME
MODE (REMAIN), KEY LOCK (OFF), BITRATE (Disp. ON), REPEAT MODE (OFF), PLAYLIST
(NORMAL), SLEEP (15 min), LINE SETUP (Model 1), DISPLAY (1 sec), RUNTIME (150msec).