©
American Audio
®
- www.AmericanAudio.us - Radius 2000™ Instruction Manual Page 15
gENERAL fUNCTIONS AND CONTROLS (Cont.)
C. VfD DISpLAY pANEL (fIgURE 4)
40. pAUSE INDICATOR -
The pause indicator will glow when the unit is in pause mode.
41. CUE INDICATOR -
This indicator will glow when the unit is in CUE mode and will flash every time
a new CUE POINT is set.
42. TOUCH INDICATOR -
This appears when anything touches the jog wheel.
43. fOLDER DISpLAY -
This indicates which folder you are in.
44. CHARACTER DISpLAY
-
This will display the name of the track and album when a Mp3 track is
playing.
45. Bpm mETER -
This meter will display the BPM's of the current track.
AUTO Bpm -
This will indicate that the AUTO BPM counter is active.
46. mEmORY BUCkET -
This meter serves two functions.
1. The bucket outline indates your cue memory status. a full outline lets you know the cue memory is
full.
Note: The scratch function will not work unless all the bars are full.
2. The five bars inside the bucket represnts the digital buffer. Each bar represents 2 seconds.
47. SD/USB INDICATOR -
This indicates which port is active. Use the
Sd card/uSB Selector (1)
to select your desired port.
48. TEmpO LOCk -
This will indicate the Tempo Lock function is active.
49. pITCH INDICATOR -
This meter will indicate how much pitch is either being applied or will be ap-
plied.
50. TImE BAR INDICATOR -
This bar gives a visual approximation of a track's remaining time This
bar will begin to flash when a track is ending. The flashing bar is great reminder, that time is running
out to get that next track ready to go.
51. TImE mETER -
These indicators will detail the current Minutes, Seconds, and Frames. The meter
will display either the elapse or remaining time of a track. The display time will depend on the se-
FOLDER
TRACK
M
TOTALREMAIN
S
F
PITCH
AUTO BPM
CD MP3
CUE
RELOOP
SINGLE
AUTO CUE
Figure 4
41
42
48
47
40
56
50
49
45
44
51
55
54
53
52
43
46
57