Technical Specifications - Model Q-2422/SX
Model:
Q-2422/SX™, 2 Channel Mixer
Power supply:
AC 115/230V, 50/60Hz selectable
Dimensions:
19” W x 7” D x 2.25” H / 482x 176x 65mm
Weight:
8.5 lbs. / 3.8 kg
Crossfader:
FF-Plus - Optical detecting faders start control - Low grounding impedance crossfader
Power Consumption:
5W typical, 7W w/ full headphone output
Headphone impedance:
16 Ohms
Input Sensitivity (Level/Impedance):
Line:
-14dBV (200mV) 12K Ohm +/- 2dB
Microphone:
-49 dBV (3.6mV / 3K Ohms +/- 3 dB
Phono:
-48dBV (4mV) 47K Ohms +/- 3dB
Aux:
-14 dBV (200mV) / 47K Ohms +/- 2dB
Output Sensitivity (Level/Impedance):
Rec Out (RCA):
-10dBV (316mV) / 2.2K Ohms +/- 2dB
Master Out (RCA):
0dBV (1V) / 610 Ohms +/-2dB
Phones (Load+32 Ohms)
: -8dBV (0.4V) /33 Ohms +/-2
dB
Maximum Output (Load = 47K, THD = 5%)
Rec:
< 18dBV (8V)
Master (RCA):
< 18dBV (8V)
Balanced (XLR):
< 18dBV (8V)
Channel Balance:
Within 3dB
Frequency Response:
Line:
20Hz - 20KHz, ± 1dB
Phono:
20Hz - 20KHz, ± 1.5dB (RIAA)
Aux:
20Hz - 20KHz, ± 1dB
Microphone:
20Hz - 20KHz, +1,-3dB
THD - Total Harmonic Distortion (1Khz, 0dBV Output):
Master Output (Load = 47K Ohms):
Less than 0.2%
Phono (Load = 32K Ohms):
Less than 0.5%
Channel Equalizer:
Bass:
+12 ± 1dB, -22 ± 2 dB at 70KHz
Mid:
+12 ± 1dB, -27 ± 2 dB at 1KHz
Treble:
+13 ±1dB, -17 ± 2 dB at 13KHz
Microphone Equalizer:
Bass:
+12 ± 1dB, -12 ± 1 dB at 100KHz
Treble:
+12 ± 1dB, -12 ± 1 dB at 10KHz
NOTES:
The specifications are subject to change to any improvement by negotiations in advance.
The parts are subject to change to any improvement within the range of the specifications.
©
American Audio
®
- www.AmericanAudio.com - Q-2422/SX User Instructions page 18
TECHNICAL SPECIFICATIONS
