©
American Audio
®
- www.AmericanAudio.us - PXI 10P™ - Instruction Manual Page 6
PXI 10P™
Controls and Features
1. HIGH FREQUENCY TRANSDUCER –
This unit is used to reproduce the high frequency
response.
2. 10” WOOFER –
The high-powered 10” woofer is used to reproduce the midrange and low
frequencies.
3. RUBBER FOOT –
The speaker includes heavy-duty rubber feet on the bottom of the unit.
These feet are used to secure a speaker to another when stacking. They are also used to
secure the speaker to the ground to prevent it from shifting during heavy bass reproduction.
4. POLE MOUNT SOCKET –
This socket is designed to fit a standard speaker pole mount or tri-
pod such as the American Audio
®
SPS-1B speaker stand.
5. STACKING NOTCHES –
These notches are designed to line up with the rubber feet of another
PXI 10P™ and are used to support another speaker when they are stacked together.
6. RIGGING POINTS –
The PXI 10P™ has four rigging points. These points are to be used to
“fly” or suspend the speaker in the air by some means. Be sure to follow the “flying” outlines
on page 15.
7. TRANSPORT HANDLE –
The PXI 10P™ come with built-in heavy-duty transportation handle.
Use this handle for secure and easy transportation.
8. POLE MOUNT LOCKING PIN –
This pin is used to secure the speaker in place when mounting
the speaker in a pole mount configuration. Always be sure to tighten down on the locking pin
to prevent the speaker from shifting during use.
1
6
4
6
5
2
3
7
8
3
