American Audio
®
• Pro-DJ™ INSTRUCTION MANUAL • PAGE 22
To FLIP-FLOP entire CDs:
To FLIP-FLOP an entire disc, be sure both drives are in continuous play mode. The
SINGLE ICON
(32)
should not be displayed in the
LCD (5)
. When both drives are in continuous play mode, follow the
directions for single track FLIP-FLOP as detailed above. When one the disc in one unit ends the other
unit will immediately begin playback.
Combining FLIP-FLOP modes:
Flip-Flop modes may combined. One unit may run in single mode and the other in continuous mode.
When the units are arranged in this fashion, the unit in single mode will play a single track and flip to
the next unit. The next unit will then play the entire disc and flip back to the other. The other will then
play the next track and flip back to the other unit, and so on.
Fader Q-Start™
This function works in conjunction with a compatible American Audio “Q-Start" DJ mixer. When used
with a compatible CD player, you can use the crossfader to start and stop the CD Player with the slide
of the fader.
Connecting your Pro-DJ to a Fader “Q” Start mixer for “Flip Flop” control:
Be sure to connect
1/8” mini plugs from the control connection on the rear your Pro-DJ to the 1/8” control jack on the
rear of American DJ “Q” series mixer. That’s it, you’ll be set for FLIP FLOP!
ADVANCED OPERATIONS
FLIP-FLOP™
This feature is kind of “auto pilot."
“Flip-Flop”
mode can only function with the use of two Pro-DJ
units. The
“Flip-Flop”
function may be used with or without an American Audio “Q” deck mixer, you
can have one unit begin playback when the other ends. You can
“Flip Flop”
single tracks, the entire
disc, a combination of the two, or you can even
“Flip-Flop”
your programmed tracks.
To FLIP-FLOP single tracks or programmed tracks:
1) Connect your system as described in the set up section on page 6.
2) Set your mixer’s crossfader to the center position.
3) Be sure your two units are single mode.
SINGLE (32)
should be indicated in the
LCD (5).
4) Load your two Pro-DJ with audio disc.
5) After they have both cued, press the
PLAY/
PAUSE BUTTON (11)
on one of your drive to
begin playback.
6) After the first unit’s single track has ended the
second unit’s track will immediately begin play-
back.
7) FLIP FLOP will continue until you stop it or
power is interrupted.
Figure 33
