BASIC OPERATIONS (CONT.)
American Audio
®
• Pro-DJ™ INSTRUCTION MANUAL • PAGE 19
EXITING A LOOP
- To exit a SEAMLESS LOOP, press the
OUT BUTTON
(15).
The
IN REALTIME CUE BUTTON (7)
and
OUT BUTTON (15)
LEDs will
remain on, but will stop flashing. Music playback will resume normal play
(Figure 24). The
IN REALTIME CUE BUTTON (7)
and
OUT/EXIT BUTTON
(15)
LEDs will remain on to remind you that a loop is stored in memory.
Figure 25
REPLAY LOOP
- The
RELOOP (13)
function allows you to return to your stored
loop at any time. The
IN REALTIME CUE BUTTON (7)
and
OUT BUTTON (15)
LEDs will indicate a loop is stored in memory, and may be played at any time.
To replay the loop, press the
RELOOP BUTTON (13).
The
IN REALTIME CUE
BUTTON (7)
and
OUT BUTTON (15)
LEDs will again begin to flash indicating
SEAMLESS LOOP mode has been activated (Figure 25) and your stored loop
will immediately begin to play.
14. EDITING A LOOP:
Please note only the ending point of a loop may be edited, a loop may be made shorter or longer. Before you
can edit your seamless loop you obviously must first have created a seamless loop to edit. If you haven’t cre-
ated a SEAMLESS LOOP, follow the instructions in step 10. If a SEAMLESS LOOP has already been created,
press the
RELOOP BUTTON (13)
to activate your SEAMLESS LOOP (Figure 25), if it is not already playing. To
edit a loop’s ending point:
1) Press the
OUT BUTTON (15)
to return to normal play from the loops cue point (Figure 24). This will
disengage the SEAMLESS LOOP and allows you to edit the loops ending point.
2) Press the
OUT BUTTON (15)
again when you reach your new ending point (Figure 23).
-
FOR A SHORTER LOOP:
Press the
OUT BUTTON (15)
at sooner point in the track (Figure 23).
-
FOR LONGER LOOP:
Press the
OUT BUTTON (15)
at later point in the track (Figure 23).
3) Press the
OUT BUTTON (15)
to set the ending point for your SEAMLESS
LOOP (Figure 22). The
IN REALTIME CUE BUTTON (7)
and
OUT BUTTON
(15)
LEDs will begin to flash indicating SEAMLESS LOOP mode has been
activated.
LOOP INDICATORS
- During a seamless loop, the
LOOP (34)
and
RELOOP
(35) INDICATORS
will light in the
LCD (5)
indication a loop is active.
Figure 24
Figure 23
