MX-1400 DSP
CONTROLS aND FUNCTiONS
©
American Audio
®
- www.americanaudio.us - MX-1400 DSP Instruction Manual Page 8
1. Microphone 1 -
This combo jack will accept a standard 1/4 plug or XLR 3-pin balanced male
plug. The volume output level for this microphone will be controlled by its own respective
Channel
fader (30).
note: We recommend that you use a 500-600ohm microphone for the best sound
quality.
2. Microphone 2 -
This combo jack will accept a standard 1/4 plug or XLR 3-pin balanced male
plug. The volume output level for this microphone will be controlled by its own respective
Channel
fader (29).
note: We recommend that you use a 500-600ohm microphone for the best sound
quality.
3. channeL voLuMe LeveL indicators -
The LED indicators that run along each channels Eq
section are used to measure incoming signal levels. Use these indicator to visually maintain an average
signal output of +4db. A consistent average output level of +4db will produce a clean output signal.
4. channeL trebLe controL -
This knob is used to adjust the treble levels of a channel
FRONT PANEL
26
14
12
13
1
9
8
7
6
5
4
2
10
24
21
20
19
17
16
22
23
25
3
18
11
15
35
34
33
32
31
30
29
27
28
36
