©
American Audio
®
- www.americanaudio.us - MX-1400 DSP Instruction Manual Page 3
NOTE: This product satisfies FCC
regulations when shielded cables
and connectors are used to con-
nect the unit to other equipment.
To prevent electromagnetic inter-
ference with electrical appliances
such as radios and televisions, use
shielded cables and connectors
for connections.
WARNINg: TO PREVENT FIRE OR ELECTRIC
ShOCk hAZARD, DO NOT EXPOSE ThIS
UNIT TO RAIN, LIqUIDS, OR MOISTURE
CAUTION: TO PREVENT ELECTRIC ShOCk
DO NOT USE ThIS (POLARIZED) PLUg
WITh AN EXTENSION CORD, RECEPTACLE,
OR OThER TYPE OF ELECTRICAL OUTLET
UNLESS ThE WIDE bLADES CAN bE
CAREFULLY INSERTED INTO A MATChINg
WIDE SLOT.
ATTENTION: POUR PREVENIR LES ChOCS
ELECTRIqUES NE PAS UTILISER CETTE
FIChE POLARISEE AVEC UN PROLON-
gATEUR, UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF
SI LES LAMES PEUVENT ETRE INSEREES A
FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
MX-1400 DSP
ELECTRiCaL SaFETY PRECaUTiONS
VOLTAgE SELECTOR SWITCh
LINE VOLTAgE SELECTION
• The desired voltage may be set with the
VOLTAgE SELECTOR switch on the rear
panel (using a flat head screw driver).
• Do not force the VOLTAgE SELECTOR
switch as this may cause damage
• If the VOLTAgE SELECTOR switch does
not move smoothly, please contact a quali-
fied service technician.
The serial and model number for this unit is
located on the rear panel. Please write down
the numbers here and retain for future refer-
ence.
Model No._____________________________
Serial No._____________________________
Purchase Notes:
Date of Purchase_______________________
Dealer Name__________________________
Dealer Address_________________________
_____________________________________
_____________________________________
Dealer Phone__________________________
