©
American Audio
®
- www.americanaudio.us - M2436FX Instruction Manual Page 14
INPUT AND OUTPUT CONNECTIONS:
34. CHANNEL MONO INPUT JACKS -
XLR JACKS -
These are balanced XLR-type input jacks.
BALANCED LINE IN JACKS -
A standard 1/4” TRS phone jack is used for balanced or unbalanced
line level signals. Examples of line level signals include most electronic keyboards, synthesizers,
turntables (with appropriate pre-amps), tape decks and the line outputs from other mixers.
35. CHANNEL STEREO INPUT JACKS -
These are unbalanced stereo line input jacks. The two
jacks provided are 1/4” and RCA.
Note: (1).
When a channel provides a 1/4” jack and an RCA jack, you may use either one of
these jacks but you may not use both at the same time. Please connect to only one of
these jacks on a channel.
(2).
The phone type jacks for CH9/10 and 11/12 also support monaural input. Specifically, if
you only input into the L (MONO) jack the mixer will send the same signal through both
L (MONO) and R inputs.
36. TAPE INPUT JACKS -
These RCA input jacks are used to connect a stereo sound source. Use
these jacks when want to connect a CD or DAT directly to the mixer for monitoring. Use the TAPE
IN CONTROL to adjust the signal level.
M2436FX
iNPUT aNd OUTPUT CONNECTiONS
39
37
36
38
35
34
45
41
43
44
40
42
INPUT AND OUTPUT CONNECTIONS
