American Audio DV2 USB, Руководство пользователя

Страница: 12 / 18

©
American Audio
®
- www.AmericanAudio.us - DV2 USB Instruction Manual Page 12
DV2 USB MIDI table
DV2 MIDI MAP(Hex)
name Type MIDI Remarks
MicGain VR 2C
MicHig VR 2D
MicLow VR 2E
CH1Gain VR 2F
CH1EqHig VR 30
CH1EqMid VR 31
CH1EqLow VR 32
CH2Gain VR 33
CH2EqHig VR 34
CH2EqMid VR 35
CH2EqLow VR 36
Master VR 37
CueMix VR 38
CueGain VR 39
CH1Fader VR 3A
CH2Fader VR 3B
Crossfader VR 3C
CH1Curve VR 3D
CFCurve VR 3E
CH2Curve VR 3F
Ch1HigCut SW/LED 01/01
Ch1MidCut SW/LED 02/02
Ch1LowCut SW/LED 03/03
Ch2HigCut SW/LED 04/04
Ch2MidCut SW/LED 05/05
Ch2LowCut SW/LED 06/06
Level Mode/MASTER LR SW/LED 07/07
TalkOver SW/LED 08/08
Ch1PFL SW/LED 09/09
Ch2PFL SW/LED 0A/0A
Ch1Reverse SW/LED 0B/0B
CFReverse SW/LED 0C/0C
Ch2Reverse SW/LED 0D/0D
PFL CH1/CH2 LED 0E
LEVEL L LEVEL 0F 0~A(0~10)
LEVEL R LEVEL 10 0~A(0~10)
Ch1FaderStar SW 20
Ch2FaderStar SW 21
CC-aBSOLUte (Vr)
Control Change messages are sent with status 0xBn, where “n” is the channel, for the specified CC
controller. Thus the controller MIDI ID is indicated with the channel along with the CC number. The
value from 0x00 to 0x7F, is directly related to the location of the controller.
SWItCh On/OFF (SW, Center, CW, CCW)
These messages are used for switches. Control Change messages are sent with status 0x9n,
SWITCH On and Off value are 0x7F and 0x00, where “n” is the channel.
LeD On/OFF (LeD)
These messages are used for LED. Control Change messages are sent with status 0x9n, LED On
and OFF value 0x7F and 0x00, where “n” is the channel.
LeVeL LeD (LeVeL)
These messages are used for LEVEL. Control Change messages are sent with status 0x9n, LED
Off value is 0x00 and On value is related to LED amount, 0x01 with one LED, 0x02 with two LED....,
where “n” is the channel.