300Mbps Wireless Access Point
20
the table. Select the device which needs to bridge, the AP will
add the device’s MAC address automatically and select the
corresponding channel.
4.1.2.2 P2MP Bridge Mode
The P2MP Bridge Mode which connects scattered wired network
together is more complicated than P2P Bridge mode. P2MP usually
transmit wireless signals from one access point, and other access points
are in charge of receiving signals so as to share network resource.
Support for up to 4 remote access point connected. In this mode,
wireless clients are not allowed to connect.
P2MP Bridge mode can connect multiple wireless access point together
without cabling. If “Root AP” is configured as P2MP bridge mode, other
(less than 4) remote access points should select P2P bridge modes. The
topology shows below:
Select WDS P2MP mode in the drop-down box of WDS mode as
the picture below.
