39
VID:
VLAN identifier. This only applies if tagged VLANs are enabled. Valid range is from 1-4094.
Alias:
Alias name for the MAC address.
3.11.4 Static
Filter
The Static Filter page (Figure 3-36) allows the user deny packet forwarding to specific MAC addresses.
The static filter table contains a MAC address and VID. All of the traffic sent to this MAC address will be
discarded by the switch.
To add a MAC address entry in the table, fill in the three parameters: MAC address, VID and Alias, and
click “Add”. To delete an entry, select the MAC address entry you wish to delete and click “Delete”.
Figure 3-36: Static Filter Page
MAC:
A six-byte long Ethernet hardware address and expressed in hex and separated by hyphens.
VID:
VLAN identifier. This only applies if tagged VLANs are enabled. Valid range is from 1-4094.
Alias:
Alias name for the MAC address.
3.11.5 MAC
Alias
The MAC Alias page (Figure 3-37) is used to allows the user to assign a plain English name to a MAC
address. This will help you tell which MAC address belongs to which user in the illegal access report.
To create or edit an entry, enter the MAC address and alias name and click “Create/Edit”. To delete an
entry, select it from the list and click “Delete”. The alias name must be composed of only letters and
number and can be up to 15 characters long.
