4
WARNING
Warning
注意
Incorrect data and information entered into the AIS is considered as erroneous information.
Erroneous information or improper configuration will cause risk to other vessels and the own
vessel when these information are transmitted. Users must be aware of this risk and make
sure that all the information entered into the system is correct and up to date.
2 INSTALLATION
2.1 General
2.1.1 Safety Instructions
Before proceeding with installation, take note of the following safety instructions and read through
this installation manual carefully.
SAFETY INSTRUCTION
SAFETY INSTRUCTIONS
ELECTRICAL SHOCK HAZARD
Do not open the case of the
equipment. Only qualified
personnel could work on the
interior of the equipment.
WARNING
TURN OFF THE POWER BEFORE
PROCEEDING WITH INSTALLATION.
Proceeding with installation with the
power on could cause electrical shock or
fire.
AVOID INSTALLING THE EQUIPMENT
WHERE THERE IS DIRECT CONTACT
WITH RAIN OR SPLASHING WATER.
Electrical shock or fire could be resulted
if water leaks into the equipment.
FOLLOW THIS INSTRUCTION
MANUAL TO PROCEED WITH THE
INSTALLATION.
AMEC and your local agent/dealer will
not bear any responsibility of
equipment damage or personnel injury
due to improper installation.
Warning Label
A warning label (Figure 2-1-1) is
attached underneath the equipment.
Warranty of the equipment will be
invalid if this label is detached or
broken. AMEC and your local
agent/dealer will not bear any
responsibility of any damage to the
equipment, or damage in related to the
equipment, personnel injury, and etc.
Reject the equipment if this label is
detached or broken. Please contact
your local agent/dealer if this label is
missing.
MAKE SURE THE POWER SOURCE
AND THE POWER INPUT OF THE
EQUIPMENT ARE COMPATIBLE.
Damage to the equipment and fire could
be resulted if the power
sources are
not
correct. Please check the correct power
input on the adaptor.
Figure 2-1-1 Warning label
Name: Warning Label
No Warranty if this label
is detached or broken.
保固撕毁无效
