56268 Rev. 1.05 November 2021
AMD NVMe/SATA RAID Quick Start Guide for
Windows Operating Systems
Chapter 3
Pre-Installation Steps
13
[Public]
3.4
Enable RAID for AMD Socket AM4-Compatible
Processors
Note: The steps to configure a system to RAID mentioned here are specific to AMD NDA BIOS
based off the Insyde BIOS. The steps for other BIOS Vendors are different.
1.
Press
ESC
to enter the
System
BIOS
setup page.
2.
Select
Setup
Utility
, then press
Enter.
3.
In the BIOS setup:
a.
Select the
Advanced
tab.
b.
Select
IDE Configuration
, then press
Enter.
c.
Set
SATA Configure
As
to
RAID
, then press
Enter.
d.
Set Force
RAID
Mode
to
Enabled
, then press
Enter.
4.
In the BIOS setup:
a.
Select the
Boot
tab.
b.
Set
Boot
Type
to
Dual
or
UEFI Boot Type
, then press
Enter.
c.
Set
EFI Device First
to
Enable
, then press
Enter.
5.
In the BIOS setup:
a.
Select the
AMD
-
PBS
tab.
b.
Set
NVMe RAID Mode
to
Enabled
, then press
Enter.
6.
In the BIOS setup:
a.
Select the AMD-CBS tab.
b.
Select
SATA Configuration Options
, then press
Enter.
c.
Set
SATA Controller
to
Enabled
, then press
Enter.
d.
Set
SATA Mode
to
RAID
, then press
Enter.
7.
In the BIOS setup:
a.
Select the
AMD-CBS
tab.
b.
Select
Promontory Common Options
, then press
Enter.
c.
Select
PT SATA Configuration Options
, then press
Enter.
d.
Set
PT SATA Port Enable to Enabled
, then press
Enter.
e.
Set
PT SATA Mode
to
RAID
, then press
Enter.
8.
Save (
F10
) the settings, then restart the system.