background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                           

 
 
 

 

5

 

Chapter 2 

Hardware Installation 

2-1 Install Socket AM2/AM2+ Supported AMD Processor 

This motherboard provides a 940-pin surface mount, Zero Insertion Force (ZIF) socket, 
referred to as the mPGA940 socket supports AMD Athlon64 processor in the 940 Pin package 
utilizes Flip-Chip Pin Grid Array package technology. 

The CPU that comes with the motherboard should have a cooling FAN attached to prevent 
overheating. If this is not the case, then purchase a correct cooling FAN before you turn on 
your system. 

WARNING! 

Be sure that there is sufficient air circulation across the processor’s 
heatsink and CPU cooling FAN is working correctly, otherwise it may 
cause the processor and motherboard overheat and damage, you may install 
an auxiliary cooling FAN, if necessary. 

To install a CPU, first turn off your system and remove its cover.    Locate the ZIF socket and 
open it by first pulling the level sideways away from the socket then upward to a 90-degree 
angle.    Insert the CPU with the correct orientation as shown below.    The notched corner 
should point toward the end of the level.    Because the CPU has a corner pin for two of the 
four corners, the CPU will only fit in the orientation as shown. 

 

                                               

 

CPU ZIF mPGAB Socket 

Colden Arrow

S

o

ck

et

 AM

2

 

 

When you put the CPU into the ZIF socket

  No force require to insert of the CPU, then press 

the level to Locate position slightly without any extra force. 

2-2  

Install 

Memory 

The motherboards provide two 240-pin DDRII DUAL INLINE MEMORY MODULES 
(DIMM) slots for DDRII memory expansion available from minimum memory size of 
128MB to maximum memory size of 4 GB DDRII SDRAM. 

Valid Memory Configurations of 2-DIMM Design Motherboard 

Bank 

240-Pin DIMM 

PCS

Total Memory 

Bank 0, 1    (DIMM1)

DDRII533/DDRII667/DDRII800/DDRII1066 X1

128MB

2 GB 

Bank 2, 3    (DIMM2)

DDRII533/DDRII667/DDRII800/DDRII1066 X1

128MB

2 GB 

Total 

System Memory (Max. 4GB) 

128MB

4 GB 

 

Recommend DIMM Module Combination 

1.

 

One DIMM Module ----Plug in DIMM1 

2. 

Two DIMM Modules---Plug in DIMM1 and DIMM2 for Dual channel function

 

 
For Dual channel Limited! 

Содержание 740G















Отзывы: