Amcrest IP2M-851EB Скачать руководство пользователя страница 47

Страница: 47 / 67

Click and drag to set video tampering for certain days of the week. Also, periods of video tampering can be set for

each day and enabled using the period settings on the bottom half of the screen. There are a total of 6 periods that can
be set.

•

Record

: This checkbox allows the user to enable the camera to record video when a video tampering alarm is

triggered.

•

Record Delay

: This field specifies in seconds how long the delay between alarm activation and recording should be.

•

Relay Out

: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the alarm

port on the back of the camera) when a video tamper alarm is triggered.

•

Alarm Delay

: This field specifies in seconds how long the delay between alarm activation and Relay alarm activation

should be.

Send Email

: This checkbox allows the user to enable the camera to send an email when a video tampering alarm is

triggered.

•

Snapshot

: This checkbox allows the user to enable the camera to take a snapshot when a video tampering alarm is

triggered.

To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the

settings, click the Save button.

5.4.3.3 Abnormality

This menu allows the user to adjust abnormality event settings. This menu has 3 tabs: SD Card, Network, and Illegal
Access.

5.4.3.3.1 SD Card

This tab allows the user to set the camera’s response to an SD card related abnormality. Below is a screenshot of the

SD card tab screen:

Содержание IP2M-851EB




































































Результаты поиска

Содержание IP2M-851EB

Отзывы:

Похожие инструкции для IP2M-851EB

Бренды по названию

Популярные бренды

Amcrest IP2M-851EB, Руководство пользователя

Результаты поиска

Содержание IP2M-851EB

Отзывы:

Похожие инструкции для IP2M-851EB

Бренды по названию

Популярные бренды