11
d) Press OK to save the current setting, then press menu to return to info display.
Press MENU return to the info display without saving the settings.
4.1.14 Video Sound
The following shows how to turn off the sound on the video recording:
a) Press MENU to display the settings menu.
b) Press RIGHT or LEFT to select the Video menu.
c) Press DOWN to select Voice.
d) Press RIGHT and select if you want sound on or off.
e) Press OK to save the current setting, then press menu to return to info display.
Press MENU return to the info display without saving the settings.
4.1.15 Delay
This parameter is how long the PIR (Passive Infrared motion sensor) will be disabled
after each triggering while in the ON mode. During this time the PIR of the device will not
react to motion. The minimum interval is 1 second. This means the PIR works indefinitely
and photos/recordings are taken almost continuously. The maximum interval is 30
minutes. This means the PIR will be disabled for 30 minutes after each trigger. The default
value is 5 seconds.
The following shows how to set the PIR Triggering Interval Time to 1 minute provided
that the previous option is 5 seconds.
a) Press MENU to display the settings menu.
b) Press LEFT or RIGHT to select the Camera menu.
c) Press DOWN to select Timer.
d) Press RIGHT to view the options and DOWN to select 1 minute.
e) Press OK to save the current setting, then press menu to return to info display.
Press MENU return to the info display without saving the settings.
4.1.16 Timer
This parameter defines a certain time period during the day when the camera can be
triggered. The rest of the time the device is shut off. The effective value of the hour ranges
from 0 to 23 while the minute ranges from 0 to 59.
Provided that you want the camera to work from 8:00AM to 5:00PM, the steps are
as follows:
a) Press MENU to display the settings menu.
b) Press RIGHT to select the Setup menu.
b) Press DOWN to select Timer.
c) Press RIGHT to select a field and press UP or DOWN to change the value until the
start time changes to 8 and the stop time changes to 17.
d) Press OK to save the current setting, then press menu to return to info display.
Press MENU return to the info display without saving the settings.
4.1.17 Enter Password
If the password setting is set to On, after switching on the camera, the LCD screen on
the camera will prompt to enter the password. The default password setting is off. It can
be changed by the following steps:
a) Press MENU to display the settings menu.
b) Press RIGHT to select the Setup menu.
b) Press DOWN to select Password.
c) Select On, press OK, then press RIGHT to select 4 numbers as a password.
d) Press OK to save the current setting, then press menu to return to info display.
f) The LCD screen will prompt to enter password next time you switch on the camera.
Press MENU return to the info display without saving the settings.
4.2 Playback
In playback mode, images and videos can be viewed and deleted. The images and
videos can be viewed on the LCD screen on the camera or the TV monitor connected to
camera with the TV cable. For simplicity, operations with the PC won’t be introduced here.
4.2.1 Viewing Photo or Video
a) Switch to TEST mode and enter into the info display.