-26-
Mounting the Camera to
a Bike
1. Unscrew both screws (i)
and place both halves (ii)
of the Bicycle Mount (A)
around the desired
position on the bike.
2. Replace the screws (i)
and tighten them until the
mount is firmly in place.
3. Remove the screw from
the top of the Mount (iii)
(i)
(ii)
(iii)
(iv)
4. If you wish to use a forward-facing bar you may wish to use
the 90° adaptor (iv) in between the camera and the bicycle
mount to make the camera forward-facing.
and slot the camera (inside waterproof case) into position,
replace screw
A
