Page 8 of 13
ON/OFF (7)
· Press “POWER” to switch the unit On or Off
· The unit will be turn to cooling mode preset to 22
o
C target temperature. Press again and the unit will
switch off.
Mode button (6)
· Press this key to choose Cooling Fan, SLEEP or Dehumidifying Mode.
Cooling Mode
· After machine turns on, default value is cooling mode with 22
o
C and low fan speed.
· Press “MODE” to select cooling mode, cooling mode indictor
(C)
turns on
· Press “UP
”
(2)
or “DOWN
”
(3)
to adjust temperature (from 16
o
C to 31
o
C)
· Press “FAN” to select fan speed (low, high)
Fan Mode
· Press “MODE” to select fan mode, fan mode indicator
(D)
turns on
Timer Mode (1)
· Under standby mode, press “TIMER” to setup the power-on time, press “TIMER” to adjust the timer (from
1 to 24 hours). Timer indicator turns on. Unit will start after selected number of hours.
· Under power on mode, press “TIMER” to setup power-off timer. Press “TIMER” to adjust the timer (from 1
to 24 hours). Timer indicator turns on. Unit will stop after selected number of hours.
· Timer functions cannot be combined or repeated. Timer mode indicator
(I)
turns on
Sleep Mode
· Press Mode button
(6)
until unit enter into sleep mode, default value of fan speed is low. Sleep mode
indicator
(E)
turns on
· When the sleep mode is turned on, under cooling mode only, one hour later, set temperature will go up 1
degree Celsius, after another hour the set temperature will go up another degree than kept at this
temperature.
· Sleeping mode is invalid under dehumidifying and fan mode.
· If internal tank full, machine standby and mode selection, sleeping mode will be cancelled.
Note:
Sleep mode is not operational in the dehumidifying or Fan mode.
Compressor Protection
· There is a three minutes compressor start delay after power on or restart.
3.
Remote Control
The air conditioner can be controlled via a remote control. Two AAA-batteries are required to use the remote
control.
Note:
the air flow direction cannot be adjusted with the remote control.
1.
Power:
Press the
key to turn on or turn off the machine
2.
Timer:
Press the
key to set the timer
3.
Down:
Press the
key to decrease temperature and timer
4.
Mode:
Press the
key to switch between cooling, fan, dehumidifier
5.
Up:
Press the
key to increase temperature and timer
6.
Fan:
Press the
key to select high / low fan speed
7.
Sleep Mode:
Press the
key to turn on the sleep mode
Содержание SF 8000E
Страница 4: ...Page 4 of 13 PARTS ...