GB
6
OPERATION
Switching the unit ON and OFF
Press the “ON/OFF” switch to turn on the unit. The power light will be green as soon
as it switches on. To turn off the unit press the “ON/OFF” key again.
Setting the Laundry Mode
Press Laundry Mode button, the LED light will turn on.
Press louvers position key to set louvers swing direction: front
→
top
→
static ,
corresponding indicator turns on.
Front:
Air comes out from front with the louvers swing angle scale about 0°~60°
Top:
Air comes out from front with the louvers swing angle scale about 30°~90°
Static:
Louvers stop swinging.
Setting the Stopping Timer
On selecting stopping timer at 8/4/2 hours, the indicating light turns
on
until the
desired selection is made.
When selecting
'
8 hours
'
, the indicator light will progress to 4 and respectively 2
hours until the unit stops.
Setting the Dehumidification level
Press dehumidify button to select Low-Middle-High level. Corresponding indicator
turns on the humidistat range for this unit from 40% to 80% RH. Use the unit on Low
mode for maximum power savings.
Setting the Ioniser
Press IONISER key on / off. Ioniser will sterilise the air preventing mould growth and
improving air quality.
Operating and Warning
1. Please use an individual safe power socket .
2. Plug to power, press ON/OFF key to turn-on the machine; press ON/OFF key again
to turn-off the dehumidifier.
3. Make sure water-tank is placed/fitted correctly. If the water tank is not fitted/placed
correctly the 'water full' light will turn on and the machine will not operate.
4. When the dehumidifiers first starts, default dehumidify setting is set to “LOW “.
5. After being turned off the machine will remember the last settings for the next power
cycle.
6. When unplugging from the wall socket use one hand to hold the plug and the other
hand against socket to avoid power cord damage.
Warning : Using poor quality sockets, extensions or overloading the circuits may
cause damage to the machine or may start a fire.
7. When switching OFF the machine, do not simply unplug the unit from the socket -
ensure you turn off the machine properly before unplugging. After dehumidifiers is
OFF, the fan will keep running for a couple of minutes and heat will be produced to
dry the dehumidifier.
Please note that when turning it off, the dehumidifier will still operate for a while
to discharge the remaining water from the desiccant disk and prevent mould growth.
