6000-ETC Operator’s Manual
P a g e | 7
Automatic Actuation
To automatically use the 6000E system, it should be
interfaced with a PLC or machine output, which
should be wired into the ETC. When the PLC or
machine output is on, the ETC will activate both
solenoids on the 6000E automatically. The Dispersing
Air Solenoid (SV1) will remain on as long as the output
is on, and the Injection Pulse Rate Solenoid (SV2) will
pulse at the set rate displayed on the ETC.
While running automatically, the spray volume and pattern should be consistent.
No misting or fogging should be present. See the 6000E Operator’s Manual for
troubleshooting spray output issues.
