AMCC 3WARE 720-0138-00 Скачать руководство пользователя страница 84

Страница: 84 / 126

Driver Installation Under Linux

3ware 9000 Series Serial ATA RAID Controller Installation Guide

Compiling a 3ware Driver for Red Hat Linux

For Experts Only

If necessary, you can compile the 3ware driver yourself. (For
example, if you are running a different kernel version.)

Notes:

You must have a full Linux kernel source tree in /usr/src/linux
in order to do the compile.

In addition, you must boot to the UP kernel to use the make targets.
Otherwise errors will result that will cause the driver build to fail.

For additional information about compiling drivers, see the
Knowledgebase on the website at www.3ware.com

Download the 3ware driver source from 3ware’s website.

Copy the driver source into a working directory. (The latest
3ware driver source is bundled with the latest firmware.)

Untar the driver source with this command:

tar zxfv 3w-9xxx.tgz

The driver source will be output to a directory called driver.

Change directory to driver.

cd driver

Red Hat 7.2 and later support multiple build targets from
makefile.

Boot to UP version of kernel to build all

modules.

Note:

In the commands below, remember that the text you enter

is case sensitive. (Be sure to type

Makefile.rh

, not

makefile.rh

Содержание 3WARE 720-0138-00































































































































Результаты поиска

Содержание 3WARE 720-0138-00

Отзывы:

AMCC 3WARE 720-0138-00, Руководство по установке, Страница: 84 / 126

Результаты поиска

Содержание 3WARE 720-0138-00

Отзывы: