AMCC 3WARE 720-0138-00, Руководство по установке, Страница: 18 / 126

Installing the Hardware
10 3ware 9000 Series Serial ATA RAID Controller Installation Guide
Before You Begin
The next few pages describe some factors you may want to consider
during installation, and the tools and equipment you will need.
Installation Considerations
Cable Length, Routing Space, and Air Flow
When you are installing multiple drives with a controller, make sure
there is adequate space in the chassis for the required cables. It is
important that the cables do not obstruct the air flow or prevent
proper ventilation of the system.
Selecting the Slot in Which to Install the Controller
Consider these factors when deciding on the slot in which to insert
the controller:
„
Cable routing may be easier if you install the 3ware RAID
controller next to an open slot.
The amount of clearance you need will depend on the number
of drives you will be connecting to the controller.
„
While the 3ware RAID Controller runs properly in any PCI or
PCI-X slot, not all slots give equal performance due to the
architecture of the PCI bus.
These slots typically give the best performance:
„
Slots closest to the Accelerated Graphics Port (AGP), if
included.
„
64-bit PCI slots
Although the controller fits in both 32-bit and 64-bit PCI or
PCI-X slots with 5V as well as with 3.3V, install it in a 64-
bit slot to take full advantage of the controller’s
performance.