9
www.amcelettronica.com
VOXOUT v. 1.2
SYMBOLS AND DISPLAY VIEWING IN STANDBY
FW:1.00
SIM: 11/12/2012
iTIM
1
4
5
3
2
Input icon
Output icon
When flashing, indicates input/outoput not in standby
2
Indicates input/output in standby
1
€
10.92
By pressing the CANC(X) key, it moves from standby
screen to SIM credit/expiration screen
The value of credit is updated automatically every
time that the dialler makes a call or sends a SMS.
It’s possible to request the credit of the SIM also by
pressing ENTER
(
✔
) from this screen.
Note: in the screen that concerns the credit and the sim’s expiration, if question marks appears instead of the data,
the information is not available at the moment. If “dots” appear instead, the system is updating the information
with the provider.
By pressing the CANC (X) key again, you will shift to the display (if available) of the entire SMS received from the
Provider
NOTE: The availability of residual credit value is closely related to the Provider of the GSM network that can pro-
vide this service or not
BEST PROVIDER TEST
Powering the dialer with an antenna wire inserted and without SIM, an analysis will be made of the signals and of the providers
present on site, and the provider with the best signal will be indicated.
The display altenrates the 2 following screens.
1
4
5
3
2
SIM RECOMMENDED
1
4
5
3
2
iTIM
Once you’ve defined the provider, remove power supply and insert the SIM in the dialer (the SIM is unlocked with the PIN number).
Power the system again, and wait for the signal and the mobile phone operator to appear on the display, as shown in the example
of the following screen: