AMC DSP 88, Руководство пользователя

Страница: 8 / 28

Operating the channel menus
Please hold the Menu >> button and then, press the mute button of the input or output channels if you
want to activate the channel menu.
Channel Linking – while holding down the <<Menu or Menu>>, more than 1 channel from the same group
(Input or Output group) can be selected to link the channels together. The green LEDs below the Mute
buttons are lit for the linked channels. Any modification of the data for the selected channel will be applied
to the linked channels as well. To cancel the linking, simply deselect the desired channel while the <<Menu
or Menu>> key is still pressed, or just press the Exit key to deselect all channels.
Input microphone gain
The level (or gain) ranges from 0dB to +45dB in 3dB steps. This level will only have an affect on the input
channel when MIC Input is selected from the System Menu.
Input / output signal
LEVEL: The level (or gain) ranges from -40.00dB to +15.00dB in 0.25dB steps.
POL: The polarity (or phase) can be normal (+) or inverted (-).
DELAY: The maximum delay permitted is 650ms, in steps of approximately 10us. It can be displayed in ms,
ft or m. The time unit of the delay is set in the system menu.