manualshive.com logo in svg

AMBROGIO LINE 250, Руководство пользователя

Поделиться
Скачать
AMBROGIO LINE 250 Скачать руководство пользователя страница 5

4

User’s manual

EN

•  Never allow people to sit on the robot. Never lift the robot to inspect the blade or to carry it while 

it is running. Do not place hands and feet under the robot when it is in operation.

•  Do not use the robot when a sprinkler system is running. In this case, program the robot and 

the sprinkler system so that they do not operate at the same time. Do not wash the robot with 

high-pressure water jets and do not immerse it in water, partially or completely, as it is not 

watertight.

•  Disconnect the power supply and activate the safety device before performing any adjustment 

or maintenance that the user is authorised to perform. Use the personal protection devices 

recommended by the Manufacturer, in particular, always wear protective gloves when handling 

the cutting blade.

•  Cleaning and maintenance must not be performed by unsupervised children.
•  Do not use the robot when the cutting blade is damaged. Replace the cutting blade. 
•  Do not use the robot when the top cover is damaged. If the mechanical parts of the robot are 

damaged, replace them.

•  Do not use the robot if the power cord of the transformer is damaged. A damaged cord can lead 

to contact with live parts. To avoid any risk, have the cord replaced by the manufacturer or by 

its technical service centre or by a person with similar qualifications. 

•  Visually  check  the  robot  regularly  to  make  sure  the  blade,  mounting  screws  and  cutting 

mechanism  are  not  worn  or  damaged.  Make  sure  that  all  the  nuts,  bolts  and  screws  are 

tightened to ensure that the robot is in good working condition.

•  Never use and recharge the robot in explosive and/or flammable environments.
•  Only use the battery charger and power supply unit supplied by the manufacturer. Improper 

use may cause electric shocks, overheating or leakage of corrosive liquids from the battery. 

If any liquid leaks, wash the battery with water/neutraliser; in case of contact with eyes, seek 

medical attention.

SAFETY DEVICES

1. Bumpers
The bumper sensor is activated if the robot strikes a solid object greater than 10 cm (3.94 ") in height, which stops the movement 

in that direction and moves backwards to avoid the obstacle.
2. Inclinometer
If the robot works on a slope which is steeper than the maximum limit, or tips over, the robot will stop the cutting blade.
3. Emergency stop switch
Located on the upper part of the robot with the word "STOP" larger than the other commands on the keypad. Pressing this button 

at any time during operation will immediately stop the movement of the lawn mower robot and the rotation of the blade will stop.
4. Over-current protection
Each motor (blade and wheels) is monitored continuously during operation for any situation that may cause them to overheat. If 

this occurs in the wheel motor, the robot will attempt to move in the opposite direction. If the over-current persists, the robot will 

stop and signal an error. If the cutting blade motor overheats, there are two intervention ranges. If the parameters fall within the 

first range, the robot will perform the manoeuvres to unblock the cutting blade. If the over-current is below the protection range, 

the robot will stop and signal a motor error.
5. No signal sensor
If there is no signal, the robot will automatically stop.

Содержание LINE 250










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды