AMBROGIO 7060DE0, Руководство пользователя

Страница: 25 / 34

24
User’s manual
EN
ORDINARY MAINTENANCE
MAINTENANCE RECOMMENDATIONS
Important
During maintenance operations, use personal protection equipment indicated by the Manufacturer, especially
when working on the blade. Before carrying out any maintenance, make sure the robot is turned OFF (see
“Robot Safety Stop”).
SCHEDULED MAINTENANCE TABLE
Frequency Part Type of maintenance Reference
Weekly
Blade
Clean and check the
efficiency of the blade.
Replace the blade if bent
due to an impact or if it is
worn out.
See “Robot Cleaning”
See “Blade Replacement”
Curb drop-off sensor
Remove any excess grass.
Change the sensors if they
are damaged.
See “Changing the curb
drop-off sensors”.
Monthly Robot Clean the robot See “Robot Cleaning”
Once a year and at the end
of the mowing season
Robot
Have the robot serviced at
an authorised service centre
See “Prolonged inactivity
and restarting”
ROBOT CLEANING
1. Stop the robot safely (see “Robot safety stop”).
Warning – Caution
Use protective gloves to avoid the risk of injury.
2. Clean the outside surfaces of the robot with a sponge using warm water and mild detergent. Wring the sponge out well to
remove any excess water before use.
Warning – Caution
Do not use a water hose to clean the robot. Water could get inside the robot and damage the components.
3. Do not use solvents or benzene so as not to damage the painted surfaces and plastic components.
4. Do not wash the internal parts of the robot and do not use jets of pressurised water so as not to damage the
electric and electronic components.
Warning – Caution
In order to not cause irreversible damage to the electric and electronic components, do not immerse the
robot, in water because it is not watertight.
5. Check the lower part of the robot (cutting blade area and wheels) and remove any deposits and/or residuals that may obstruct
the correct functioning of the robot.
6. To remove any deposits and/or other residuals from the blade, use a suitable brush.
7. Check the level of sharpness of the cutting blade. If necessary sharpen.