Ambit Microsystems Corporation
國碁電子
(
股
)
公司
5F-1, 5 Hsin-An Rd., Hsinchu Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.
TEL: 886-3-5784975, FAX: 886-3-5782924, Internet: http:\\www.ambit.com.tw\
中華民國臺灣省新竹縣新竹科學園區新安路
5
號
5
樓之
1
電話
886-3-5784975
，傳真：
886-3-5782924
antenna.
End Product Labeling
This transmitter module is authorized only for use in devices where the
antenna may be installed such that 20 cm may be maintained between the
antenna and users (for example access points, routers, wireless ASDL
modems, certain laptop configurations, and similar equipment).
The final end product must be labeled in a visible area with the following: "
FCC ID: MCLT60H67703"
Additional Information That must be Provided to OEM Integrators
The end user should NOT be provided any instructions on how to remove or
install the device.
USA Radio Frequency Interference Requirements
FCC Regulations Part 15 Declaration of Conformity (DoC)
Ambit Microsystems Corporation declares that the equipment described in this
document is within the requirements of the Code of Federal Regulations listed
below:
Title 47 Part 15, Subpart B, Class B for a digital device.
This declaration is based upon the compliance of the Wireless LAN Mini PCI
Adapters to the above standards. Ambit has determined that the models listed
have been shown to comply with the applicable technical standards if no
unauthorized change is made in the equipment and if the equipment is
properly maintained and operated. The hardware or software can not be
replaced or modified by any third party other than Ambit. Changes or
modifications not expressly approved by Ambit could void the user
’
s authority
to operate the equipment.
These units are identical to the units tested and found acceptable with the
applicable standards. Records maintained by Ambit continue to reflect that
units being produced under this Declaration of Conformity, within the variation
