Ambit Microsystems Corporation
國碁電子
(
股
)
公司
5F-1, 5 Hsin-An Rd., Hsinchu Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.
TEL: 886-3-5784975, FAX: 886-3-5782924, Internet: http:\\www.ambit.com.tw\
中華民國臺灣省新竹縣新竹科學園區新安路
5
號
5
樓之
1
電話
886-3-5784975
，傳真：
886-3-5782924
Radio Band
You can choose the Radio Band you want to use like ‘
802.11a
’, ‘
802.11b
’, ‘
802.11a
Turbo
’, ‘
802.11g
’. Currently ‘
802.11g’
is not supported at our 802.11a/b MiniPCI
wireless LAN Card. And ‘
802.11a Turbo
’ is the specific Turbo mode for Atheros
solution to let you reach the data rate up to 108Mbps while connecting to the same
Atheros AP that also enable this turbo mode.
Transmit Parameter
You can set TX Rate of 802.11a or 802.11b by checking ‘
Enable TX Rate Control
’.
Then go to
TX Rate
(802.11a or 802.11b) to choose the data rate you want to fix.
Transmit Power:
You can choose the Full Power, 50%, 25%, 12% or Lowest Power
depend on the device distance you want to associate with. While the device is very
close to your Wireless LAN Card, then you can choose Lowest output Power to save
the battery life.
Ad Hoc Channel:
Select which channel you want to use at Ad hoc mode. If you
don’t know which channel you want to use, please select Auto.
Encryption Type:
This field defines the card to use the specific security type (WEP,
AES only or Auto switching on WEP and AES) when the card enable the encryption.
Scan Type:
Specify passive or auto scans. Most regions are set to use an active scan
mode. Passive mode sets the wireless card to listen-only mode when its power on
