4.4 Channel Selection
Press the
CH/+
button to switch the display between
remote sensors 1 through 8, and scroll mode
. In scroll
mode, all of detected outdoor sensors will be displayed in
five second intervals.
4.5 Sensor Search Mode
If any of the sensor communication is lost, dashes (--.-)
will be displayed on the screen. To reacquire the signal:
1. If a specific channel is lost, press the
CH/+
button
to display this channel, then Press and hold the
CH/+
button for
3
seconds, and the remote search
icon will be constantly displayed for up to 3
minutes. Once the signal is reacquired, the remote
search icon will turn off, and the current values
will be displayed.
2. If new sensors are added, subtracted, or multiple
sensor channels are lost, press and hold the
CH/+
button for
5
seconds (on any channel), and the
remote search icon will be constantly displayed
for up to 10 minutes. Once the signal is reacquired,
the remote search icon will turn off, and the
current values will be displayed.
4.6 Best Practices for Wireless Communication
Wireless communication is susceptible to interference,
distance, walls and metal barriers. We recommend the
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 12
