Version 1.0
©Copyright 2020, Ambient LLC. All Rights Reserved.
Page 36
https://www.amazon.com/dp/B074PGCM1D/
6.5.3
Works with Google Assistant
The Ambient Weather Google Assistant app provides Ambient Weather personal weather station
owners with the ability to get real-time, and past weather information generated by the devices they
have set up at AmbientWeather.net
Link your account to get started: say 'hey google, Ambient Weather... weather report.' This will
provide you with your outdoor weather report. You can ask for your indoor weather report as well by
saying, ' indoor conditions'.
You can also link the Ambient Weather app by downloading the Google Assistant.
Here are some sample commands:
•
Weather Report
•
Outdoor conditions
•
Indoor conditions
•
Yesterday’s weather
•
Conditions for October 15, 2017
•
Conditions for September 2017
•
Conditions for 2016
For more information and to enable this app, visit:
https://assistant.google.com/services/a/id/668e6f3369f27209/
6.6
Advanced Settings
To view advanced settings, from the Setup panel (Figure 43), tap the
ADVANCED
tab.
6.6.1
Calibration
Calibration is optional. The purpose of calibration is to fine tune or correct for any sensor error
associated with the devices margin of error. Errors can occur due to electronic variation (example, the
temperature sensor is a resistive thermal device or RTD, the humidity sensor is a capacitance device),
mechanical variation, or degradation (wearing of moving parts, contamination of sensors).
Calibration is only useful if you have a known calibrated source you can compare it against and is
optional. This section discusses practices, procedures and sources for sensor calibration to reduce
manufacturing and degradation errors. Do not compare your readings obtained from sources such as
the internet, radio, television or newspapers. The purpose of your weather station is to measure
conditions of your surroundings, which vary significantly from location to location.
Note
: The indoor temperature and humidity sensor is housed inside the display console. Channel 1-7
sensors are optional.