7
6.
Fasten the lower mounting pole (which is swaged on the top end) to your mounting pole or bracket
(purchased separately) with the hose clamps. Tighten the lower mounting pole to your mounting pole
with the hose clamps with a flat head screw driver, as shown in Figure 5. Slide the top weather station
pole (with the sensor array) into the lower pole (connected to your mounting pole) when your station is
finally mounted.
Figure 5
7.
Install the solar shield over the thermo-hygrometer/transmitter, and use the enclosed zip ties to clean up
the cables.
3.4
Display Console
3.4.1
Display Console Layout
Note:
The presence of the "Alarm-On icon" in the section means that the particular alarm has been enabled.
