Version 1.2
©Copyright 2010, Ambient LLC. All Rights Reserved.
Page 13
be flashing.
Press the
+
key
to adjust the pressure threshold from 3.0 to 9.0 hPa/hr (the default
is 4 hPa/hr).
5.1.5 Set Wind Units
Wind Units
. Press the
SET
key to set the wind units. The wind will begin flashing. Press the
+
key to
alternate the display unit between km/h, mph, m/s, knots, and bft (or Beaufort scale).
5.1.5
Set Rain Units
Rain Units
. Press the
SET
key to set the rain units. The rain will begin flashing. Press the
+
key to
alternate the display unit between in and mm.
5.2
Quick Set Mode
While in the Normal mode, press the
SET
key to enter the Quick Set Mode. The Quick Set mode can
be exited at any time by either pressing the
HISTORY
key or waiting for the 10-second time-out to
take effect. You can skip over any setting by pressing the
SET
key again.
Holding the
+
key
(increase) or
MIN/MAX
key (decrease)
when in the Set mode will change values
rapidly.
5.2.1
Outdoor Temperature, Wind chill and Dew Point Display
Outdoor Temperature, Wind Chill and Dew Point Display.
The outdoor temperature will begin
flashing. Press the
+
key to alternate the display between the outdoor temperature, wind chill and dew
point.
5.2.2
Relative and Absolute Pressure Display
Relative and Absolute Pressure Display.
Press the
SET
key to change the pressure display. The
pressure will begin flashing. Press the
+
key to alternate the display between absolute and relative
pressure.
5.2.3
Average Wind Speed and Wind Gust
Average Wind Speed and Gust
. Press the
SET
key to change the wind speed display. The wind
speed will begin flashing. Press the
+
key to alternate the display between the 48 second Wind
Average Speed and Gust Speed (or the maximum wind speed in the update period, which is 48
seconds).
5.2.4
Rain Display and Reset
1.
Rain Increment Display
. Press the
SET
key to change the rain increment display. The rain
will begin flashing. Press the
+
key to alternate the display between the 1 hour rain, 24 hour
rain, weekly monthly rain, and total rain (since reset).
2.
Total Rain Reset.
With the total rain flashing in the previous step, press and hold the
SET
key for three seconds, and the total rain will reset to zero.
5.3
History Mode
While in the Normal mode, press the
HISTORY
key to enter the History mode.