Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 5
(alkaline or lithium, avoid rechargeable) batteries in the back of the display console.
Figure 4
All of the LCD segments will light up for a few seconds to verify all segments are operating properly.
3.
Replace the battery door, and fold out the desk stand and place the console in the upright
position.
The console will instantly display indoor temperature as designated by the
icon. The
remote temperature probes will update on the display within a few minutes on the
appropriate channel.
While in the search mode, the remote search icon
will be constantly displayed for each
sensor.
If you have more than two remote sensors (additional channels 3-8 are supported), the
display will automatically toggle between sensors until all sensors have reported in.
Do not touch any buttons until all of the remote sensors has reported in, or the radio search
icon
is no longer visible, otherwise the remote sensor search mode will be terminated.
When the remote sensor temperature has been received, the console will automatically
switch to the normal mode, and all further settings can be performed.
If a remote does not update, please reference the troubleshooting guide in Section 7.
2.2.1
Display Console Layout
Note:
The following illustration shows the full segment LCD display for description purposes
only, and will not appear like this during normal operation.
