Ambient Weather WS-09 Скачать руководство пользователя

Страница: 10 / 15

Version 1.0

Page 10

4.2.2

Alarm Defaults

Channel Application

Default Condition

MIN (low alarm) ºF

MAX (high alarm)
ºF

Refrigerator

OFF

Freezer

OFF

-22

4.2.3

Setting the Min and Max Alarm

With the indicator arrow

pointing at the appropriate channel, press and hold the

ALARM

button

for 3 seconds and the

MAX

alarm will flash. Press the

button to increase the MAX

alarm and the

CLEAR/-

button to decrease the MAX alarm. Press and hold the + or - button to change

rapidly.

Press the

ALARM

button again and the MIN alarm will flash. Press the

button to

increase the MIN alarm and the

CLEAR/-

button to decrease the MIN alarm. Press and hold the + or -

button to change rapidly.

When complete, press the

ALARM

button again, and the display will return to normal mode.

4.2.4

Viewing the Min and Max Alarms

With the indicator arrow

pointing at the indoor temperature

channel, press the

ALARM

button to view the Channe1 (refrigerator) and Channel 2 (freezer) alarm limits.

4.3 Reset Max/Min

With the indicator arrow

pointing at the appropriate channel, press and hold the

CLEAR/-

button for 3 seconds to restore the MAX and MIN values to the current value.

4.4

Temperature Units of Measure

With the indicator arrow

pointing at the indoor temperature

channel, press and hold the

ALARM

button for 3 seconds to change between degrees Celsius and degrees Fahrenheit units of

measure.

4.5 Sensor Search Mode

If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire
the signal:

If a specific channel is lost, press the

button until the channel indication arrow

is pointing at the appropriate channel.

Press and hold the

button for 3 seconds, and the remote search icon

will

be constantly displayed for up to 10 minutes.

Once the signal is reacquired, the remote search icon

will turn off, and the current value

will be displayed.

If new sensors are added, subtracted, or multiple sensor channels are lost, press the

button until the channel indication arrow

is pointing at the indoor

temperature

. Press and hold the

button for 3 seconds, and the remote

search icon

will be constantly displayed for up to 10 minutes. Once the signal is

reacquired, the remote search icon

will turn off, and the current value will be displayed.

Содержание WS-09
















Результаты поиска

Содержание WS-09

Отзывы:

Похожие инструкции для WS-09

Бренды по названию

Популярные бренды

Ambient Weather WS-09, Руководство пользователя

Результаты поиска

Содержание WS-09

Отзывы:

Похожие инструкции для WS-09

Бренды по названию

Популярные бренды