LED
Figure 1
2.
BEFORE
inserting the batteries, locate the dip switches on the inside
cover of the lid of the transmitter.
Figure 2
Figure 2
3.
Channel Number:
The WS-08 supports up to eight transmitters. To set
each channel number (the default is Channel 1), change Dip Switches 1, 2 and
3, as referenced in
Table 1
.
4.
Temperature Units of Measure:
To change the transmitter display units of
measure (°F vs. °C), change Dip Switch 4, as referenced in
Table 1
.
Table 1
displays all four switches in the OFF position (factory default setting).
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 3
DIP SWITCH
FUNCTION
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
°F
°C
