Version 1.6
©Copyright 2019, Ambient LLC. All Rights Reserved.
Page 29
Command
Mode
Settings
TEMP
. and
MAX/MIN
+ 5 seconds
Enter Calibration
Mode, Indoor
Temperature
Press [WIND +] or [PRESSURE -] to adjust the indoor
temperature up or down.
To restore to factory default, press [ALARM].
[SET]
Indoor Humidity
Press [WIND +] or [PRESSURE -] to adjust the indoor
humidity up or down.
To restore to factory default, press [ALARM].
[SET]
Outdoor Temperature
Press [WIND +] or [PRESSURE -] to adjust the outdoor
temperature up or down.
To restore to factory default, press [ALARM].
[SET]
Outdoor Humidity
Press [WIND +] or [PRESSURE -] to adjust the outdoor
humidity up or down.
To restore to factory default, press [ALARM].
[SET]
Absolute Pressure
Press [WIND +] or [PRESSURE -] to adjust the absolute
pressure up or down.
To restore to factory default, press [ALARM].
Note
: The absolute pressure calibration affects the
relative pressure by the same amount. It is recommend
you calibrate the relative pressure only, per Section 6.3.
[SET]
Wind Direction
Press [WIND +] or [PRESSURE -] to adjust the wind
direction up or down.
To restore to factory default, press [ALARM].
[SET]
Wind Speed Factor
Press [WIND +] or [PRESSURE -] to adjust the wind
speed factor up or down.
To restore to factory default, press [ALARM].
[SET]
Rain Factor
Press [WIND +] or [PRESSURE -] to adjust the rain
factor up or down.
To restore to factory default, press [ALARM].
[SET]*
Daily Rain
Press [WIND +] or [PRESSURE -] to adjust the daily
rain up or down.
[SET]*
Monthly Rain
Press [WIND +] or [PRESSURE -] to adjust the monthly
rain up or down.
[SET]*
Yearly Rain
Press [WIND +] or [PRESSURE -] to adjust the yearly
rain up or down.
[SET]*
Total Rain
Press [WIND +] or [PRESSURE -] to adjust the total
rain up or down.
[SET]
Exit calibration mode
Figure 24
* Not available in earlier models
6.10.2
Calibration Ranges
The following table summarizes the permissible calibration ranges.
