Off no charge.
1.4 Brightness Setting
The brightness of the display can be adjusted in 7 steps. One button is held down
while the other is used to change the display brightness. Brightness levels 6 and
7 are only usable on intermittent display, Clapper mode. There is an internal
command to lower brightness level if the display is left on permanently at the very
bright level.As the batteries become empty it can occur that the display flickers. It
has switched automatically to a lower brightness. Change batteries soon. time
has not been lost.
1.5 Generator
Setting the generator by hand is easy and has the following features
*Setting user bits without stopping or changing time
*Setting time and user together with one setting movement
*Setting time without changing user
Switch on, and open the clapper.
SET MODE
Hold down both buttons at once for five seconds to reach set mode,
Left button moves digits up .Hold down left button right button moves digits
down.
Right button moves cursor to the right .hold down right button left button moves
cursor to the left.
The cursor can be moved round a ring with user bits, then one space (POS 9) and
onto time. Moving The cursor out of the time space through pos 9 reaches user
bits again and so on.
In pos 9 the left button can be used to toggle the newly set or old time and user
bits. the one showing in the display will be selected when entering.
USERBIT DESIGNATION
Y: year. M: month. D: day. R: roll. U: unit.
Old YY MM DD RR
New MM DD UR RR
or AATON
DD MM YY PP
YY MM DD PP
The user bits show with cursor on left digit blinking. Set digits as above.
Newer master slates will show cursor at roll increment position one click and the
roll number will increase.
After user has been set move cursor to pos 9 and toggle old or new user. to
select.
