background image

AMBIENT CLOCKIT MASTER SLATE ACD101
The ambient compact Clockit Master Slate is a state of the art time code clapper
containing a software based timecode generator and reader. The generator is
driven by a very accurate crystal oscillator giving better than  1 ppm
accuracy.(one Frame a  Day)

The slate is compatible with other clockit units such as the ACL Lockit video
camera synchroniser, ATM Clockit Timecode burst unit for audio recorders and
the Ambient Clockit controller and can be set by Aaton ASCII  command or jam
synced to external timecode. Hand setting is easy and quick

The slate can be used as a stand alone unit where its accuracy will be better than
most of the units it is set by, or as part of a Clockit driven system where the
overall accuracy of all clockit units can be further tuned by the Clockit Controller
to give a system accuracy of  better than 1 ppm.

The slate can function as a reader of external timecode and its display can be
retarded or advanced 7 Frames. The display has seven different brightness levels
which can be set by push button. The slate's internal generator can be jam synced
with ext timecode. set by ascii (Aaton Origen C) or set by hand. In the hand setting
mode the user bits can be changed as in changing camera roll number without
stopping the time. in other words once the time of day and date has been set it is
good for all day. When using the display intermittently  as in normal clapping
mode the slate can run for several days on one set of batteries.

General features
*Small Rugged compact design running on 6 Mignon (Penlite) cells.
*DC/DC converter for long Battery life  several days in Clapper mode.
 *Microprocessor design gives minimal electronics and low power
*Variable Brightness Display. settable with external push buttons
*Clapper functions invertable showing time or user first
*Clapper fiunction without sticks using buttons,good for documentary
*Reads external time code to 1.5 times normal speed no  frame delay.
*Time display shift se - 7 Frames
*Standard 5 pole Lemo input/output socket.
*Battery backup to allow battery change without losing time ( 5minutes)
*Led indicators to show state of battery and generator
*Slate extension for writing Take and Scene.
*A bigger slate for feature film use is being built.
*Charge internal batteries through Lemo input socket

GENERATOR FEATURES
Fully clockit compatible
Very accurate tunable  clock,
Better than Arri cameras less than one frame a day without tuning
Hand setting of time for use as Master Slate to set ARRI 535. Aaton etc

interstage

Phistersvej 31, 2900 Hellerup, Danmark

Telefon 3946 0000, fax 3946 0040

www.interstage.dk

-

 pro audio with a smile

Содержание Clockit Master Slate ACD101






Отзывы: