Operation
13
10
1
2
1
2
9
6
8
5
7
8. Properly close the lid
1
by pushing it onto the main unit
5
until it noticeably
locks into place (see step 1 in
Fig. 2
).
9. Make sure the base and the underside of the main unit are dry. Place the main
unit centrally onto the base
10
(see step 2 in
Fig. 2
).
10. Press the power button
9
. Both the blue and red indicator lights illuminate.
The main unit heats up. The product automatically stops operation when frothing
and heating is done. The blue indicator light
7
turns off and the red indicator
light
8
keeps flashing for 30 seconds.
Frothing cold milk: This operation works without heating. After pouring cold milk
into the main unit, press the power button for 1–2 seconds. The blue indicator
light illuminates. The product automatically stops operation when frothing is
done. The blue indicator light turns off and the red indicator light keeps flashing
for 30 seconds.
11. Lift the main unit off the base by its handle
6
.
12. Carefully open the lid and empty the drink from the main unit into a heat-
resistant container.
13. Clean the main unit, lid and whisk after each use (see chapter “Cleaning”).
14. Disconnect the base from the mains socket when the product is not in use.
Remark: Rinse completely clean with a damp cloth to ensure no milk is left inside the
appliance. As dried milk will burn immediately after heating.