Ambiano MD 37450, Руководство пользователя

Страница: 19 / 29

Tips on saving energy
19
Tips on saving energy
In order to achieve the best possible cooling performance with low energy
consumption, observe the following:
− Do not position the appliance near a heat source (radiator or cooker, etc.).
− The location should not be too warm, dry, dust-free and well ventilated.
− Ensure that air can circulate freely around the appliance.
− The energy consumption will be lowest if all bottle racks are left inside the
appliance when it is in use.
− If the door is left open for a long time, this can cause the temperature inside
the appliance zones to increase signifi cantly. Only open the door briefl y when
loading and removing bottles. Less cold can escape if the door is left open for
only a short time and therefore the appliance requires less energy.
− Select the temperature setting according to how full the appliance is.
− Ensure that the door seal is undamaged and that the door closes properly.
− If the appliance is left empty for an extended period of time, switch it off. Defrost
and clean the appliance and allow it to dry. Leave the door open to prevent
mould from forming in the appliance.
Switching off the appliance
− To switch off the appliance, pull the mains plug out of the socket.
Cleaning
− Regularly clean surfaces that may come into contact with food and accessible
drain systems (see “Cleaning the drip tray” on page 20).
DANGER!
Risk of electric shock!
There is a risk of electric shock from electrifi ed parts.
− Before starting any cleaning or maintenance work, pull the
mains plug out of the socket (pull on the plug, not the cable). If
the plug is not accessible, the corresponding fuse for the mains
electricity supply to the house needs to be switched off.
− Never touch the mains plug with wet hands!