Wiring Scheme
Accessories Connection Possibilities
3 IN ports/pin
o
1 Digital
o
2 Digital or Analog
3 OUT ports/pins
o
3 Digital (for future use)
1 One-wire connection
Installation team must follow the below Accessory connection for efficient working. If
installation has to be done with different patterns then please contact your immediate tech
support for the possibilities. You can configure these accessories settings in our amber
connect fleet management platform.
Fleet Portal > Settings > Vehicle > Safety > Device Input Configuration
[This setting available Only to specific device models that supports the accessories]
Warning:
These settings should exactly match with the actual accessories connected to the
device ports during the installation. If you make any changes on this will result in data
reception from accessories to the device. So Kindly make sure you are changing this with
proper understanding of which accessory connected to which wire during the installation.
