Output current (U
out
> 3.0 V)
30
mA
Short circuit current (U
out
= 0)
75
mA
NEGATIVE INPUT
Input resistance
38.45
kΩ
Input voltage (Recommended Operating
Conditions)
0
Supply
voltage
V
Input voltage threshold
0.5
V
Sink current
180
nA
Safety information
This message contains information on how to operate ACT 400-m safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read
these instructions carefully and follow them strictly before operating the device!
• The device uses SELV limited power source. The nominal voltage is +12 V DC. The
allowed voltage range is +10...+30 V DC.
• To avoid mechanical damage, it is advised to transport the device in an impact-proof
package. Before usage, the device should be placed so that its LED indicators are
visible. They show the status of device operation.
• When connecting the 2x6 connector wires to the vehicle, the appropriate jumpers of the
vehicle power supply should be disconnected.
• Before unmounting the device from the vehicle, the 2x6 connector must be
disconnected. The device is designed to be mounted in a zone of limited access, which is
inaccessible to the operator. All related devices must meet the requirements of EN
60950-1 standard. The device ACT 400-m is not designed as a navigational device for
boats.
Do not disassemble the device. If the device is damaged, the power supply cables
are not isolated or the isolation is damaged, DO NOT touch the device before
unplugging the power supply.
All wireless data transferring devices produce interference that may affect other
devices which are placed nearby.
The device must be connected only by qualified personnel.
The device must be firmly fastened in a predefined location.
The programming must be performed using a PC with autonomic power supply.
Installation and/or handling during a lightning storm is prohibited.
The device is susceptible to water and humidity.
Содержание Amber Govern T400-m
Страница 1: ......
