• When connecting the 2x10 connector wires to the vehicle, the appropriate jumpers of the
vehicle power supply should be disconnected.
• Before dismounting the device from the vehicle, the 2x10 connector must be disconnected.
• The device is designed to be mounted in a zone of limited access, which is inaccessible to the
operator. All related devices must meet the requirements of EN 62368-1 standard.
• The device AGT400-LA is not designed as a navigational device for boats.
Do not disassemble the device. If the device is damaged, the power supply cables
are not isolated or the isolation is damaged, DO NOT touch the device before
unplugging the power supply.
All wireless data transferring devices produce interference that may affect other
devices which are placed nearby.
The device must be connected only by qualified personnel.
The device must be firmly fastened in a predefined location.
The programming must be performed using a PC with autonomic power supply.
Installation and/or handling during a lightning storm is prohibited.
The device is susceptible to water and humidity.
Certification and Approvals
• AGT400-LA CE / RED
• AGT400-LA CE E-Mark
• AGT400-LA CE REACH
• AGT400-LA CE Declaration of IMEI assignment
• AGT400-LA CE Declaration of device operation temperature
This sign on the package means that it is necessary to read the User‘s Manual
before your start using the device. Full User‘s Manual version can be found in our
Wiki
.
