Adjustments
Centaur BAG 0070.1 12.08
75
8.3
Adjusting outside discs
The outside discs at the front right and rear left must be adjusted.
Telescoping outside disc
1. Actuate tractor control unit
1
(2 x yellow).
Raise the running gear!
2. Loosen clip pin and remove bolt (Fig. 48/1).
3. Telescope the outside disc with the bolt and
secure using the clip pin.
Fig. 48
Setting the working depth of the outside
discs
1. Actuate tractor control unit
1
(2 x yellow).
Raise the running gear!
2. Release screw unions (Fig. 48/2).
3. Reset outside discs in slotted hole so that
no dam formation is caused during use.
4. Retighten the screw unions.
Setting the penetration angle of the outside
1. Actuate tractor control unit
1
(2 x yellow).
Raise the running gear!
2. Undo three screw unions (Fig. 49/1).
3. Adjust the penetration angle by twisting the
outside discs so that there is no dam
formation during use.
4. Retighten the screw unions.
Fig. 49
