Amazone Catros XL 7003-2TX Скачать руководство пользователя страница 78

Страница: 78 / 124

Coupling and uncoupling the machine

Catros BAG0210.5 07.21

WARNING
Risk of crushing, drawing in, catching or contusions if the ma-

chine unexpectedly comes away from the tractor!

Use the intended equipment to connect the tractor and the

machine in the proper way.

When coupling the machine to the tractor's three-point hy-

draulic system, ensure that the attachment categories of

the tractor and the machine are the same.

WARNING
Risk of power supply failure between the tractor and the ma-

chine through damaged supply lines!

During coupling, check the course of the power lines. The power lines

•

must give slightly without tension, bending or rubbing on all

movements of the connected machine.

•

may not scour other parts.

Содержание Catros XL 7003-2TX





























































































































Результаты поиска

Содержание Catros XL 7003-2TX

Отзывы:

Бренды по названию

Популярные бренды

Amazone Catros XL 7003-2TX, Руководство по эксплуатации

Результаты поиска

Содержание Catros XL 7003-2TX

Отзывы:

Бренды по названию

Популярные бренды